Agilent 437B电能表是一种低成本，性能高，单声道，可编程，平均电能表与8480家庭权力的传感器。根据对其中功率传感器是用来， 437B可以测量从-70 dBm的（ 100pw ） 44 dBm的（ 25瓦特）频率从100千赫到110千兆赫。
专为吃系统，并要求台式测量， 437B电能表，使快速，准确，可靠的平均功率测量。只有3英寸高和半机架宽， 437B最大限度地使用关键的机架空间，在吃的系统。先进塑胶科技使用，在437B内阁相结合，重量轻的塑料与屏蔽效能的金属，使437B唯一的电能表，以满足美军标MIL - STD - 461C的EMI规格。
权力的参考自动校准和归零
占空比进入一个方便的峰值功率代表性的测量，平均输出功率
10预装传感器卡的因素，频率
频率范围： 100千赫到110吉赫
附注:本公司长期收购频谱分析仪,网络分析仪,信号源等二手仪器,并长期承接美国惠普,爱德万,美国泰克等二手仪器的维修!如有兴趣,请和我们联系!
The Agilent 437B power meter is a low-cost, high-performance, single-channel, programmable, average power meter compatible with the 8480 family of power sensors. Depending on which power sensor is used, the 437B can measure from -70 dBm (100pW) to +44 dBm (25W) at frequencies from 100 kHz to 110 GHz.
Designed for the ATE systems and demanding benchtop measurements, the 437B power meter makes fast, accurate, and reliable average power measurements. Only three inches high and half rack wide, the 437B minimizes the use of critical rack space in ATE systems. The advanced plastics technology used in the 437B cabinet combines the light weight of plastic with the shielding effectiveness of metal, making the 437B the only power meter to meet MIL-STD-461C EMI specifications.
Power reference for automatic calibration and zeroing
Duty cycle entry for a convenient peak power representation of the measurement average power
Ten preloaded sensor card factors versus frequency
Frequency Range: 100 kHz to 110 GHz
|
首页 >>> >>> Agilent 437B 
信息检索